Panasonic EYADA Serie Manual De Instrucciones página 43

b4 Tool Reset Permission Setting
A tool reset is permitted.
When you set it to "_1", you can
initialise the tool by holding down the
OK button, ▼ button, and ▲ button at
the same time in setting mode.
When it is set to "_1"
A tool reset is
executed.
EYADA_EU.indb EYADA_EU.indb 43 43
■ Setting Procedure
P. 24
The set value goes
back to the default.
Switch to setting mode.
Set the forward/reverse lever to
the trigger switch lock position, and
hold down the OK button.
Choose "b4" by pressing
the ▲ and ▼ buttons, and
press the OK button.
A set value appears on the display.
Select a desired one by
pressing the ▲ and ▼
buttons.
The default is "_1".
Display Tool reset permission
Not permitted
(Tool reset disabled)
Permitted
( The tool reset is
permitted. To execute
the tool reset, hold
down the OK button,
▼ button, and ▲
button at the same
time.)
Press the OK button to
confirm it.
When the setting is completed, a
buzzer sounds long (a long beep),
and the display returns to the menu
screen.
Back to Operation Mode.
Hold down the OK button.
P. 22
P. 22
43
EN
2023/11/01 2023/11/01 16:44:29 16:44:29