Oase AquaMax Eco Classic Serie Instrucciones De Uso página 27

Install the unit at a dry place
Dry installation requires the pump to be installed without a filter housing.
Conversion
Connecting
• Hoses or pipes can be connected to the inlet (IN) and outlet (OUT).
– Connections for hoses are part of the scope of delivery. Instructions for their installation
can be found below.
– An adapter for pipes with DN75/DN110 is available as an accessory (article number 35578).
• Ensure that the intake-side hose (IN) does not have a smaller diameter than the pressure-side
hose (OUT).
• The larger the hose diameter, the smaller the friction losses in the lines and the better the
flow rate.
• The hose diameter must not be limited unnecessarily by a hose sleeve. Shorten the hose
sleeve based on the hose diameter, if necessary.
Do not plug the power plug into the socket yet!
EN
AMX0204
AMX0094
27