Publicidad
Idiomas disponibles
Idiomas disponibles
This symbol indicates that the device uses R32, a coolant featuring a low combustion speed.
This symbol indicates that a maintenance technician must handle this equipment according to the operating manual.
This symbol indicates that the operating manual should be read attentively prior to use.
WARNING: In normal conditions, a suitable HP can heat the water of the pool by 1°C to 2°C per day.
It is therefore quite normal not to feel a temperature difference at the outlet of the circuit when the HP is operating. A heated pool should be covered to prevent heat losses.
The appliance is designed to be used in a swimming pool as described in standard NF-EN-16713.
•
Failure to comply with the warnings could cause damage to the swimming pool equipment as well as severe injuries or death.
•
Only a qualified person possessing the adequate technical skills (electricity, hydraulic, refrigeration) is authorised to undertake maintenance operations or repairs on the
device. A qualified technician working on the device must use/wear personal protective equipment (safety goggles, protection gloves, etc...) To avoid all risk of injury arising
during work on the device.
•
Prior to any intervention on the device, ensure that it is powered down and has undergone the lockout-tag out procedure.
•
The device is designed specifically for use in swimming pools and spas; it must not be used for purposes other than the ones it was designed for.
•
This device is not intended for children.
•
This device is not intended to be used by persons (including children, of 8 or more) who lack experience or who suffer from physical, sensory, or mental impairment,
Except;
•
If it is operated under supervision or with operating instructions issued by a person responsible for their safety; and
•
If they understand the risks taken.
•
Children must be supervised to ensure that they do not play with the device.
•
The installation of the device should be carried out according to the manufacturer's instructions and in compliance with local and national applicable standards. The installer
is responsible for the installation of the device and for compliance with national regulations relating to installation procedures. The manufacturer will not be liable in case of
non-compliance with the installation standards that apply locally.
•
For any action other than simple maintenance operations by the user as described in this manual, the product should be maintained by a certified professional.
•
Any improper installation and/or use can cause damages and severe injuries (and even death).
•
Do not touch the fan or the moving parts, and do not insert objects or your fingers close to the moving parts when the device is operating. • Moving parts can
•
Cause severe injuries and even death.
•
Do not pull on the hoses and the connections to move the machine.
WARNINGS CONCERNING ELECTRICAL APPLIANCES:
•
The power supply of the device must be protected by a 30-mA security residual current protection system, as per the standards that apply in the country of installation.
•
Do not use an extension to connect the device; only connect the device directly to a suitable power outlet.
•
If a fixed device does not feature a power cord and a plug, or any other means to disconnect from the power supply with a separation of the contacts in all the poles, enabling
total disconnection in case of a category III electrical surge, the manual will mention that the disconnection means must be integrated in the fixed wiring, as per relevant
wiring rules.
•
An adapted disconnection method, complying with all local and national requirements relating to category III electrical surges, and that disconnects all the poles of the supply
circuit, must be installed in the supply circuit of the device. This disconnection method is not provided with the device and should be provided by the installation technician.
•
Prior to installation, check that:
•
The voltage featuring on the information plate of the device matches the voltage of the power supply,
•
The power supply is suitable for operating the device and has an earthing connection.
•
The plug (as necessary) adapts to the plug hole.
•
If the power cord is damaged, it should imperatively be replaced by the manufacturer, a technician or a person qualified to ensure safety.
WARNINGS RELATING TO DEVICES CONTAINING A COOLANT:
•
The coolant R32 is a coolant of category A2L, which is considered as potentially flammable.
•
Do not release R32 fluid into the atmosphere. This fluid is a greenhouse effect fluorinated gas, covered by the Kyoto Protocol, with a global warming potential (GWP) = 675 for
R32.
•
The device must be stored in a well-ventilated place and kept away from flames.
•
Install the unit outdoors. Do not install the unit indoors or in an outdoor area that is closed and poorly ventilated.
•
To comply with the relevant standards and regulations in terms of the environment and installation procedures, and in particular with decree Nº 2015-1790 and/ or European
regulation EU 517/2014, a search for leaks of the cooling circuit must be conducted at least once a year. This operation should be carried out by a certified specialist of cool-
ing devices.
•
Please keep and transmit these documents for reference throughout the lifespan of the device.
- 19 -
Publicidad
