Sony PCLK-U5 Manual De Instrucciones página 4

Connections
Use the supplied CAV-U5, USB cable, and optical digital connecting cable to connect your
PC to a system stereo component.
Be sure to start up Windows before making connections for the first time. For details,
see "Installing the USB driver" on the next page.
To the optical digital
input connector
Optical digital
connecting cable
To the DIGITAL
OUT connector
Notes
•Make sure the plug is straight when you insert it. Inserting it at an angle may damage the
connector parts.
•Connect the DIGITAL OUT connector on the CAV-U5 to the optical digital input connector on an
MD deck or a system stereo component, using the supplied optical digital connecting cable. For
more information on connections and how to change the input selection, refer to the instruction
manual of the component that you use.
•Connect the CAV-U5 to the PC directly, using the supplied USB cable. If a USB hub is used for
connections, the CAV-U5 may not work properly.
4-
GB
With the plug correctly oriented,
insert it fully into the connector.
MD deck
CAV-U5
To the PC's
USB port
USB cable
To the USB
connector
PC