Troubleshooting
System sounds (warning alarm/mail
arrival notice) are not output.
b System sounds are not output from the
PC while the PC is recognizing the
CAV-U5 as a playback device.
"Din Unlock" appears in the display or no
sound is output or recorded on the
connected system stereo component when
you start playback (CD, MIDI file, etc.) on
the PC.
b Check the USB connector connection.
b If the problem occurred just after
installing the driver, restart the PC.
b Check the status of the installed device
and the setting of the Multimedia
Properties.
Some noise is heard during playback on
the PC.
b If you are running a large application,
quit the application to reduce the
system load. A temporary deficiency in
system resources may also cause the
sound output to stop.
Specifications
Description
PC connecting adaptor
Sampling frequency
44.1 kHz
USB connector
Series B receptacle, bus power mode (in
compliance with USB Ver. 1.1)
Output
DIGITAL OUT: rectangular connector, wave
length: 660 nm
Power consumption
Approx. 80 mA
Dimensions (w/h/d)
Approx. 43 × 23 × 80 mm (not incl. projecting
parts)
Mass
Approx. 40 g
7-
GB