Sony PCLK-U5 Manual De Instrucciones página 5

Installing the USB driver
Note
The following instructions are for Windows
98. Some parts of the installation procedure
may differ depending on which operating
system you are installing the driver to.
1
Start up Windows, and quit any
active applications.
2
Connect the CAV-U5 to the PC, using
the supplied USB cable.
"Add New Hardware Wizard"
appears.
3
Follow the instructions of the wizard.
Verifying the status of the
installed device
Be sure to check the status of the installed
device after you have installed the driver.
1
Open the Control Panel.
In the Start menu, select "Settings",
then "Control Panel."
2
Double-click the System icon.
The "System Properties" dialog box
appears.
3
Click the "Device Manager" tab.
Make sure that the following items
are listed in the "Device Manager"
window.
— "USB Audio Device" under
"Sound, video and game
controllers"
— "USB Composite Device" under
"Universal Serial Bus controllers"
Note on Windows Me
Depending on the configuration of your
PC, may appear before "USB
Composite Device". This, however, does
not affect the operation of the system
(the PC and system stereo component).
4
Click "OK" to close the "System
Properties" dialog box.
Setting the multimedia
parameters on the PC
You must set the multimedia parameters
on the PC before you can output audio
from a CD in the CD-ROM drive or a
MIDI file stored on the hard disk of the
PC through the system stereo component
connected to the PC.
1
Open the Control Panel.
In the Start menu, select "Settings",
then "Control Panel."
2
Double-click the Multimedia icon.
The "Multimedia Properties" dialog
box appears.
continued
5-
GB