Dometic GROUP WAECO AirConServiceCenter ASC5000 Instrucciones De Uso página 113

AirConServiceCenter
3. Place a receptacle with a capacity of at least 1/2 litre under the AirCon
Service Center. The oil from the vacuum pump flows through the
opening (I) in the base of the unit.
4. Unscrew the oil filling plug (G).
5. To drain the oil, unscrew the oil drain plug (J).
6. Once the oil has been completely drained from the pump housing,
screw the oil drain plug (J) back in.
7. Top up with new vacuum pump oil to the middle of the sight glass (H)
and screw the oil filling plug (G) back in.
8. Put the front panel and control panel back on and reconnect the power
plug.
NOTE
I
After finishing the service tasks, you must delete the respective service mes-
sages (counter reset). To do this, switch to the "Other selections" – "Service"
menu and enter the code "7782". Use the cursor keys
required entry and press ENTER to confirm. Follow the display instructions,
and press and hold the ENTER button for 3°seconds. Switch back to the
previous selection using STOP.
When changing the vacuum pump oil, the counter "Vacuum time" must be
reset.
EN
H
I
G
J
or
Service tasks
to select the
113