Wilo Tagus Vac 7 Instrucciones De Instalación Y Funcionamiento página 44

English
6.3 Working principle controller
A B
Start up
• Switch off an installed refill equipment.
Close the inflow valves.
• Switch on the controller (D).
A Display
B Error LED
C Navigation wheel
D ON/OFF switch controller
Use the navigation wheel (C) to navigate
through the menus an to confirm the input.
The display (A) shows the menus. In case of
A
errors the error LED (B) is on.
------ Liter
• Hold down the navigation wheel for two
seconds to go to the process display,
whatever the cursor position.
* Turbo = Fast
------ Liter
44
C D
2 sec...
System
-h Turbo
--- bar
Start
--:--
p
------ Liter ---
B C D
2 sec...
System
*
-h Turbo
--- bar
System
Start
--:-- Error
-h Turbo
p
*
-h Turbo
--- --- bar
--- bar
Start
Start
--:--
--:--
p
------ Liter ---
------ Liter ---
System
*
-h Turbo
--- bar
Start
--:-- Error
p
-h Turbo
---
--- bar
Start
--:--
p
------ Liter ---
• In case of errors the process display switches
from [SYSTEM] to [ERROR] and the LED is on.
• The error messages, minimum water level,
minimum pressure alarm are consistent by
the first start of operation.
• It is possible to turn the wheel to switch
between [SYSTEM] and [ERROR].
*
• When [ERROR] is displayed press the wheel
to go to the error list. In case of more than
one error, scroll through the errors. All errors
are shown in accordance of appearance.
• When [SYSTEM] is displayed, press the wheel
to go to the option menu.
* Turbo = Fast
*
p
*
Start
--:--
------ Liter ---
System
*
-h Turbo
--- bar
Start
--:-- Error
p
-h Turbo
------ Liter ---
--- bar
Start
--:--
------ Liter ---
03/2024
p
*
p