Publicidad
Idiomas disponibles
Idiomas disponibles
Left engine
4.3.3 Main Machine Installation
Please refer to Figure 7 to fix the tail of the main machine and the connecting bracket with the
installation screws, and then manually adjust the telescopic arm to the appropriate length, finally fix
the telescopic arm connector and the front mounting bracket with the installation screws. Pull the
door after installation to ensure the travel is flexible without jamming.
1 – Mounting screw (long); 2 – Spring washer; 3 – Gasket; 4 – Mounting screw (short); 5 - Nut
Installation direction: door opens inward.
EN
Figure 6
Figure 7
Right engine
Publicidad
