MSW Motor Technics MSW-GDOOR-003B Manual De Instrucciones página 45

5.5 Trimmers Setting
Obstacle Sensibility Trimmer
To adjust the sensitivity of obstacle -- clockwise to increase, counterclockwise to reduce the sensitivity
of obstacle. If there are environmental effects, such as heavy winds, adjust the trimmer according to
environment.
Slow Speed Distance Trimmer
To adjust slow speed distance -- clockwise to increase, counterclockwise to decrease slow speed
distance. Please do not set very short slow speed distance, to avoid the gate collision.
Gate Moving Speed Trimmer
To adjust gate moving speed -- clockwise to accelerate, counterclockwise to slow down. The trimmer
can be adjusted to change the opening and closing travel time. This adjustment must be finished
before travel setting.
Counterclockwise Clockwise
reduce Increase
FORCE
Obstacle Sensibility Trimmer
5.6 Learning Remote Control & Delete Remote Control
5.6.1 Learning Remote Control
Press and hold "-" button, the alarm light will keep flashing, and digital screen displays remote control
mode -- "PO" -- two swing gates single channel mode; "Pd" -- single gate four channel mode; Press the
button of the remote control to be learned, the digital screen will show the number of current learned
remote control, then the remote-control learning is completed. (The default of new paired remote
control is two swing gates single channel mode).
5.6.2 Delete Remote Control
Enter "AE" in the digital screen and then to choose "rE" to delete the remote controls.
EN
Counterclockwise Clockwise
reduce Increase
SLOW DOWN
Slow Speed Distance Trimmer
Figure 15
A: Single Channel Mode:
1 – Open / Close / Stop
Counterclockwise Clockwise
reduce Increase
SPEED
Gate Moving Speed Trimmer