Bresser FREEK VONK 9820402 Instrucciones De Uso página 41

IR Brightness High, middle, low
Language Deutsch, English, Français, Español,
Italiano, Chinese, Japanese
System Time
Time lapse ON/OFF
Timer Setting ON/OFF
Camera Name ON/OFF
Password ON/OFF
Audio recording ON/OFF
Beep sound ON/OFF
Firmware
Default YES/NO
Format YES/NO
This function is used to set the radiation brightness of the infrared lights.
Select the illuminance suitable for the respective operating environment.
The IR brightness has a considerable influence on the battery life.
Choose your language.
Here you can set the date and time.
With this setting, the camera will automatically take pictures at a
set interval. This function can work together with the timer function
(Timer setting). (Note: In this mode, the PIR sensor is disabled, the
camera will not record video).
Decide when the camera starts and stops recording. If Time Lapse is
active, a video will be created from the captured photos at the end.
Without time lapse, photos will be taken at a time interval with the
value set in the "PIR Interval".
Give the camera a name for identification.
Setup a password to protect your camera.
Choose if camera should record sound in video mode.
Menu button sound on or off
Shows the version number.
Resets all the settings of the user and resets to default settings
(factory settings).
Formats the sd card. All data on the card will be deleted.
EN
41