Fan Control Adjustment; Ionisation Current; Electrodes' Position - baltur BPM 40 MFB Manual De Instrucciones

ENGLISH
LME ...

FAN CONTROL ADJUSTMENT

Potentiometers' position
P1
1
st
P2
Ignition burner output regulation
P3
2
nd
The minimum current needed to run the apparatus is 1,5 µA. The
burner provides a significantly higher current and therefore does not
normally require any checks at all. Should however, the ionisation
current need to be measured a microammeter must be connected
in series to the ionization electrode

ELECTRODES' POSITION

8
stage burner output regulation
stage burner output regulation

IONISATION CURRENT