Publicidad
(EN)
Therefore, the charging process must be interrupted by pressing the "STOP" key before reconnecting to a battery!
TECHNICAL DATA
Type
Mains input voltage
Max. Mains power consumption
Charge voltage Easy + Boost
Charging voltage conservation
Charging voltage service
Charging voltage reactivation
Max. Charging current (12V)
± 4%
Max. Charging current (24V)
± 4%
Minimum battery voltage
Ambient temperature
Cooling
Charging characteristic
Battery types
Battery capacity (Ah)
Weight (with 3m charging
cable)
To start charging or service mode, the connected battery must have a minimum voltage of 10 V or more. Otherwise,
the device will not start charging. Otherwise, the reactivation program must be started.
The quality of charging voltage and charging current is very important. High ripple leads to heating of the battery and wear of
the positive electrode. MAWEK battery chargers are characterized by very clean voltage and smooth current with low ripple!
BHFL 33
BHFL44
3,2 A
5,2 A
25 A
44 A
12 A
-
Convection
20-250
25-400
2,5 kg
4 kg
BHFL66
90 – 264V 47-63Hz
8,2 A
14-15 V (± 0,3%) adjustable
min. 13.5 V (± 0,3%)
13,9 V (± 0,3%) adjustable
max.15,5 V (± 0,3%)
66 A
-
10 V resp. 20 V, 3 V at reactivation
-20 °C - 50 °C
temperature controlled fan
IUoU adjustable
Lead-acid, lead-GEL, AGM, lithium with BMS
50-600
4,5 kg
13
BHFL99
BHFL133
230V /50 Hz
10 A
10A
90 A
125 A
45 A
62 A
50-900
50-1200
6,5 kg
7,3 kg
Publicidad
