Publicidad
Idiomas disponibles
Idiomas disponibles
_ Changing the direction of the safety seat
The iGRADE safety seat can be used in the rear facing position from birth to 105 cm in
height, or in the forward facing position from 15 months up to 150 cm. the safety seat can rotate
360° degrees.
It can be locked into 4 different positions:
Forward facing and rearward facing (the only positions suitable for travelling in) and 2
loading positions
To release the swivel feature, pull the lever on the base (6) and turn the seat to the required
locking position. (2a)
NOTE: In vehicle without rear seat doors, the swivel is limited for reasons of space between
the seat and the sides.
Using the cushion insert.
The iGRADE chair comes equipped with cushions to reduce the cabin when the baby
It is small (40 to 75cm)
_ Fastening the child securely in the safety seat (from 40 to 105 cm)
• Fit the cushion insert (8) in place if necessary (from 40 to 75 cm).
• Loosen the integral belts by pulling the straps (7) above the buckle while pressing the
tightener button (7b). (3a)
• Undo the buckle (7a). (3b)
EN
30
Publicidad
