Publicidad
Idiomas disponibles
Idiomas disponibles
7.
Technical data
Dimensions L x W x H
Sickle bar mower unit
width
Number of blades
Cutting speed
Cut height
Speed
Wheel diameter
Handlebar height
Weight
Drive
Type of engine
Displacement
Idle speed
Maximum speed
Engine starter
Power
Fuel
Fuel tank capacity
Required engine oil
Engine oil tank capacity
Subject to technical changes!
Noise and vibration
m Warning: Noise can have serious effects on your
health. If the machine noise exceeds 85 dB, please
wear suitable hearing protection.
Information on noise level per ISO 11094:1991; EN
ISO 3744
Noise data
Sound power level L
WA
Sound pressure level L
pA
Uncertainty K
wa/pA
26 | GB
1265 x 920 x 1300 mm
880 mm
18 pcs.
800 m/s
30 - 60 mm
2.52 km/h
320 mm
830 / 970 / 1100 mm
58 kg
1-cylinder, 4-stroke OHV
engine
196 cm³
1800 - 2200 rpm
3300 rpm
Cable pull
4.2 kW
Unleaded petrol from octane
rating 90 and maximum
organic ethanol content
of 5%
SAE 10W-30 / SAE
10W-40
0.6 l
101.6 dB
65.21 dB
2.01 dB
www.scheppach.com
Vibration parameters
Vibration value per EN 12733:2018
Vibration a
h
Uncertainty K
h
8. Unpacking
• Open the packaging and carefully remove the prod-
uct.
• Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the product and accessory parts for transport
damage. In the event of complaints the carrier must
be informed immediately. Later claims will not be
recognised.
• If possible, keep the packaging until the expiry of the
warranty period.
• Familiarise yourself with the product by means of the
operating manual before using for the first time.
• With accessories as well as wearing parts and re-
placement parts use only original parts. Spare parts
can be obtained from your specialist dealer.
• When ordering please provide our article number as
well as type and year of manufacture for the product.
m WARNING!
1 l
The product and the packaging material are not
children's toys! Do not let children play with plas-
tic bags, films or small parts! There is a danger of
choking or suffocating!
9.
Layout
Fitting the wheels (Fig. 3)
• Place the axle cover (14) on the gear shaft, the nar-
row side must face the machine.
• Place the wheel (9) on the gearbox shaft, align it with
the hole and secure it with the bolt (19).
Fitting the mower unit for cutter bar mower (Fig. 4)
• Align the holes of the cutter bar (10) and gear unit and
fix them with bolts and nuts (21+22).
Fitting the handlebar (Fig. 5)
• Align the holes in the handlebar (2) and guide bar
(12).
• Secure the handlebar with screws and nuts (17 + 18).
13.647 m/s²
1.5 m/s²
Publicidad
