Publicidad
Idiomas disponibles
Idiomas disponibles
4. OPERATING YOUR APPLIANCE
Temperature Control
Your refrigerator has one control for regulating the temperature. The temperature control is located
on the right side of the fridge.
The first time you put your appliance into operation, set the thermostat to "6" and let it run empty for
4 hours before storing food for it to cool sufficiently. After 24, adjust the temperature control to the
setting that best suits your needs.
The range of the temperature control is from position" 1" the warmest to "6" the coldest. Adjust the
temperature control to the setting that best suits your needs. The setting of "3" should be appropriate
for home or office refrigerator use.
Appliance thermostat has 6 settings. The appliance assures that temperature is maintained as long
as it is in operation and that it is used in normal conditions of use. The temperature inside the
appliance can be influenced by many factors : ambient temperature, sun exposure, number of door
opening and amount of food stored... The slight changes in temperature are perfectly normal.
• Settings 1: Refrigerator compartment average temperature 9°C / Freezer
compartment average temperature -6°C
• Settings 2: Refrigerator compartment average temperature 8°C / Freezer
compartment average temperature -10°C
• Settings 3: Refrigerator compartment average temperature 6°C / Freezer
compartment average temperature -13°C
• Settings 4: Refrigerator compartment average temperature 5°C / Freezer
compartment average temperature -15°C
• Settings 5: Refrigerator compartment average temperature3°C / Freezer
compartment average temperature -18°C
• Settings 6: Refrigerator compartment average temperature 2°C / Freezer
compartment average temperature -20°C
NOTE:
▪
Turning the temperature control to "0" position stops the cooling cycle but does not shut off
the power to the refrigerator.
▪
If the unit is unplugged, lost power, or turned off; you must wait 3 to 5 minutes before
restarting the unit. If you attempt to restart before this time delay, the refrigerator will not
start.
▪
If you choose to change the thermostat setting, adjust thermostat control by one numerical
increment at a time. Allow several hours for temperature to stabilize between adjustments.
31
Publicidad
