Publicidad
Idiomas disponibles
Idiomas disponibles
www.evolutionpowertools.com
CHIP COLLECTION TRAY
The chip collection tray should be emptied
at regular intervals. We recommend that for
efficiency purposes the tray be emptied when
it is approximately 60% full.
To check the Chip Collection Tray:
• Turn the locking lever to the horizontal
position and withdraw the tray from the
machine to check the contents.
• Empty the contents of the tray into a
suitable recycling bin.
• It may be necessary to wear a dust mask
when emptying the chip collection tray.
• Replace the chip collection tray and return the
locking lever to the vertical position to secure
the tray within the machine's base.
TRANSPORTATION/STORAGE
For ease and convenience, when transporting
or storing the machine, the cutting head can
be held in the 'down' position.
To hold the cutting head down:
• Lower the cutting head to its lowest position.
• Rotate the cutting head Locking Pin 1/4 of
a turn and allow it to deploy to the 'locked
down' position.
(6.4)
ENVIRONMENTAL PROTECTION
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
local authority or retailer for recycling advice.
21
EN
ES
FR
Publicidad
