Publicidad
Idiomas disponibles
Idiomas disponibles
Press the keys
your selection.
Press the key
The "System language" item allows the language to be configured automatically when
configuring the Ipercom system.
2.4
DATE AND TIME
In the configuration menu, select the "Date and Time" item to set/change the date and time visible on the
video door phone.
Press the keys
and
the configuration.
•
Date: the box on the left allows changing the format of the displayed date: DD/MM/YYYY or MM/DD/
YYYY. The boxes on the right show the date detected by the Ipercom system.
•
Time: The box on the left allows changing the format of the displayed time: 24H or 12H. The boxes on
the right allow the time detected by the Ipercom system to be displayed. If the time detected is before
noon, AM is displayed in the last box, whereas PM is displayed, if it is after noon.
After configuration is complete, press the
2.5
ACTIVATING THE CALL FORWARDING FUNCTION (MASTER
ONLY)
ATTENTION! To enable the function, a router providing Internet access to the video door phone must be
present.
The "Call forwarding" function allows forwarding an audio/video or audio only call to a Smartphone with
Android or iOS operating system.
In order to receive the call, the Urmet CallMe App must be installed on the Smartphone, connected to the
Internet via its own data connection or WiFi.
Depending on the Ipercom system configuration ("CallMe Manager Support" parameter enabled or
disabled) it is necessary to follow the correct procedure for configuring and activating the call forwarding
function:
CallMe Manager support enabled on the Ipercom system
1.
Download the Urmet CallMe App from the Apple Store (IOS) or the Play Store (Android)
2.
Create an account on the Urmet Cloud through the CallMe App.
3.
Enable the account using the PDF document sent by the administrator and the CallMe App.
For the procedure required to create an account through the CallMe App, refer to the
"Configuring the CallMe App" appendix in the
the website www.urmet.com
6
and
to select the language you wish to set, then press the key
to go back to the configuration menu.
to select the parameter to be configured, then press the key
key to return to the configuration menu.
Ipercom system technical manual
to confirm
to carry out
available at
DS1761-047
Publicidad
