Publicidad
LED LIGHT GUIDE
PAIRING
CONNECTED
CONNECTING
CONNECTED
Flashing red
Steady red
Breathing purple
Steady purple
Breathing blue
DONGLE RESET
CONNECTING
CONNECTED
Reset if the dongle has issues pairing with the earbuds.
Plug the dongle into the USB-C port of your VR headset or gaming
console, then insert an object with a sharp tip for three seconds to
reset the dongle. Open the charging case, then press and hold the
button on the charging case for 3 seconds to pair with the dongle.
SPECS
Specifications are subject to change without notice.
Input
Rated output power
Battery capacity
Charging time
Playtime (connected via Bluetooth)
Playtime (connected via Dongle)
Driver unit
Frequency response
Impedance
Waterproof level (Earbuds)
<10%
>10%
CONNECTED
CONNECTED
3s
PAIRING
CONNECTED
5 V
0.5 A
5 V
0.4 A(0.2A per port)
63mAh x 2 (earbuds);
550mAh (charging case)
2 hours
Up to 5.5 hours (Total 22 hours
with the charging case)
Up to 6 hours (Total 24 hours
with the charging case)
11mm dynamic driver
20Hz - 20kHz
16 Ω
IPX4
EARBUDS RESET
1
×
3
>10%
Reset if the earbuds have issues pairing with each other or with
other devices.
Return the earbuds in the charging case and leave the case open.
Press and hold the button on the back for 10 seconds until the
charging case LED indicator flashes red three times.
DONGLE STORAGE
3s
The dongle can be magnetically adhered to the inside of the lid of
the charging case.
You need to take out both earbuds first, then take out or store the
dongle.
Bluetooth version
Bluetooth range
Dongle transmitter range
EN 03
2
10s
2
1
5.2
15m / 49ft
6m / 19.7ft
×3
Publicidad
