Orbegozo ADR 122 Manual De Instrucciones página 41

ADR 122 ADR 128 ADRW 120 ADRW 125
3. As you see in the following images, install the extraction tube
4. Plug the cable into an AC 220~240V / 50Hz power outlet.
5. Press "POWER" to turn on the portable air conditioner.
6. When using cooling and dehumidification functions, keep an interval of at least 3 minutes between each
ON/OFF.
Cooling mode
- Press the "Mode" button until the "Cooling" icon lights up.
- Press the temperature increase or decrease buttons until you select the desired temperature (between 16
and 31ºC).
- Press the "Speed" button to select the fan speed.
Dehumidifier mode
- Press the "Mode" button until the "Dehumidifier" icon lights up.
- The temperature will be automatically selected to the current minus two degrees.
- The fan speed will automatically be selected to low.
- Place the drain hose in the "Dehumidifier mode water outlet".
- Take the hose to a drain.
Fan Mode
- Press the "Mode" button until the "Fan" icon lights up.
- Press the "Speed" button to select the fan speed.
41