Publicidad
Idiomas disponibles
Idiomas disponibles
ADR 122 ADR 128 ADRW 120 ADRW 125
- Press the "Mode" button until the "Heating" icon lights up.
- Press the temperature increase or decrease buttons until you select the desired temperature (between 16º
and 31º).
- Press the "Speed" button to select the fan speed.
ON timer setting:
- When the air conditioner is off, press the "Timer" button and select the desired ON time through the temperature
and time setting buttons.
- "The preset ignition time" is shown on the display.
- The ignition time can be adjusted at any time between 0 and 24 hours.
- Press the "Timer" button again to confirm, the timer indicator turns on.
- To deactivate the function, press the "Timer" button until the indicator goes off.
OFF timer setting:
- When the air conditioner is on, press the "Timer" button and select the desired OFF time through the
temperature and time setting buttons.
- "The preset shutdown time" is shown on the display.
- The shutdown time can be adjusted at any time between 0 and 24 hours.
- Press the "Timer" button again to confirm, the timer indicator turns on.
- To deactivate the function, press the "Timer" button until the indicator goes off.
Once the appliance is turned on, press this button to make the grille move up and down continuously.
When you press this button again, the grille will remain in the current position.
•
This mode can only be activated from the remote control and from the APP on the ADRW 120 and
ADRW 125 models.
•
To activate the function press the SLEEP key:
•
• In cold mode it will reduce the fan to low speed and the temperature will increase 1º every hour
and at most 2º after two hours.
•
• In heating mode, it will reduce the fan to low speed and the temperature will decrease by 1º every
hour and by a maximum of 2º after two hours.
Heating mode (For models ADR 128/ADRW125)
Automatic Oscillation
Sleep Mode
Timer
42
Publicidad
