Observe the following instructions:
– Only guide the machine against the workpiece
when it is switched on.
– A significant increase in the force required to ad-
vance the machine and slow working progress
are indicators that the blades are worn.
WARNING
Risk of injury
Always pull the mains plug out of the socket be-
fore performing work on the machine such as
changing and adjusting accessories!
Use only original Festool accessories and Festool
consumable material intended for this machine be-
cause these components are designed specifically
for the machine. Using accessories and consum-
able material from other suppliers will most likely
affect the quality of your working results and limit
any warranty claims. Machine wear or your own
personal workload may increase depending on the
application. Protect yourself and your machine, and
preserve your warranty claims by always using
original Festool accessories and Festool consum-
able material!
Always use original Festool tools and accessories.
Using low-quality tools or accessories from other
manufacturers may increase the risk of injury and
cause serious machine imbalance that decreases
12
Working with the machine
– Hold the machine by the gripping surface [1-5]
with both hands to ensure safe guidance. Do not
cover the cooling air openings [1-6] with your
hand. Otherwise there is a risk of the machine
overheating.
– Always secure the workpiece in such a manner
that it cannot move while being processed.
Accessories
the quality of the working results and accelerates
machine wear.
The order numbers of the accessories and tools can
be found in the Festool catalogue or on the Internet
under "www.festoolusa.com".
A depth stop and positioning aid can be mounted on
the adapter and offset in 30° increments in line with
the tool using the detent button [4-1].
4
4-1
Mounting the adapter [4]