AEG GDG961AL Manual De Instrucciones página 66

1. Press the button to change the colour
temperature from neutral, through warm
to cold.
2. Press and hold the
smoothly between light colour
temperatures.
Release it once you reach the desired
setting.
AuroraTech®
It is a function that automatically adjusts the
illumination colour and intensity based on the
time of day, creating an optimal ambiance.
Use the app to activate this function.
After activating from the app, the function
will operate each time the lighting is
switched on. You can still manually
adjust the lighting settings using the
and buttons. However, the
AuroraTech® function will be
deactivated.
3.2 Hob²Hood function
It is a function that connects the hob to a
hood. Both the hob and the hood are
equipped with an infrared signal
communicator. The fan speed is determined
based on the mode setting and the
temperature of the hottest cookware on the
hob. Alternatively, you can manually control
the fan using the hob. This function can be
activated from the hob's control panel.
For more information how to use the
function, refer to the hob user manual.
For information on how to use the
function together with AutoSense
function, refer to the AutoSense chapter.
3.3 Activating Boost Function
When you press and hold
function starts to operate for 8 minutes. After
that time, the appliance returns to its previous
speed settings.
66 ENGLISH
button to move
, the Boost
3.4 AutoSense
The function automatically adjusts the fan
speed level basing on the TVOC sensor
(Total Volatile Organic Compounds), air
temperature, and relative humidity coming
from the hob.
1. Press to turn on the function.
The function indicator lights up.
2. To turn off the function, press
other speed level button on the hood
control panel.
WARNING!
If your hob is equipped with the
Hob²Hood function, switch its mode to H1
to use it together with the AutoSense. In
this mode, the AutoSense function and
lighting are activated automatically each
time the hob is turned on. Refer to hob
user manual.
WARNING!
During the first 96 hours after plugging in
the appliance, the function runs in a
dedicated startup mode for air sensor
tuning. Hood reactions may vary at the
startup mode. During that time the
indicator pulsates.
WARNING!
A blackout or unplugging and plugging in
the appliance again causes internal
sensor self-tuning. It may take up to 24
hours for the function to regain full
capability.
The AutoSense function can run for a
maximum of 5 hours.
Pressing the button with the hood off
will start the AutoSense function at
Breeze speed by default. When another
speed has been already selected and the
fan is working, the AutoSense function
will start at that speed.
or any