AEG GDG961AL Manual De Instrucciones página 68

3.7 AutoSense filter notification
Filter alarm reminds to clean the AutoSense
filter. The indicators
for 30 seconds if the filter must be cleaned.
Refer to Care and cleaning chapter.
A reset can be performed during or out of the
notification period.
To reset the function during the notification
period:
1. Press and hold the
seconds.
Indicators and
correct reset.
To reset the function out of the notification
period:
1. Make sure that the fan is turned off.
2. Press and hold the
seconds.
The indicator blinks once for the correct
reset.
3.8 Deactivating and activating
panel sounds
To deactivate or activate the sounds of the
panel:
1. Make sure the fan and the lighting are
turned off.
2. Press and hold
Both indicators blink once if sounds are
enabled and twice if sounds are disabled.
The on/off sounds for the hood cannot be
disabled.
3.9 WiFi connectivity setup
This feature enables you to connect your
appliance to a WiFi network and pair it with
your mobile device. Using this feature, you
can access additional functions, control and
monitor your appliance from your mobile
device, and receive notifications.
To connect the appliance you need:
68 ENGLISH
and blink regularly
button for 3
stop blinking for the
button for 3
and buttons.
• Wireless network with the Internet
connection,
• Mobile device connected to your wireless
network.
Frequency/Protocol
Power
Encryption
Installing the app
Take the following steps to connect the
appliance to WiFi :
1. Make sure that the appliance is plugged
into a power socket and turned on.
2. Make sure that your mobile device is
connected to the same wireless network
you want to add your appliance to.
3. To download the app, use your mobile
device's camera to scan the QR code
located on the back cover of the user
manual. You can also download the app
directly from Google Play (Android) or
App Store (iOS).
4. Open the app and register to create an
account.
Configuring the appliance wireless
connection
Follow the instructions in the app to complete
the onboarding process:
1. Press and hold
your appliance, the
continuously. The onboarding process is
ongoing.
2. Continue to follow the instructions in the
app to complete the onboarding process.
To stop the onboarding process, press
the or any of the speed level buttons.
After the successful onboarding, the
indicator stops flashing and becomes steady.
WiFi: 2.4 GHz / 802.11
bgn
WiFi 2.4 GHz: <20 dBm
WPA-PSK, WPA2-PSK,
WPA3-SAE
and buttons on
indicator flashes