Problem
The filter alarm indicator
together with
.
The App cannot connect to the ap‐
pliance.
The App cannot frequently connect
to the appliance.
6. ENVIRONMENTAL CONCERNS
Recycle materials with the symbol
packaging in relevant containers to recycle it.
Help protect the environment and human
health by recycling waste of electrical and
electronic appliances. Do not dispose of
72
ENGLISH
Possible cause
The AutoSense filter alarm is
is on
on. The filter must be
cleaned.
Connectivity issues.
Connectivity issues.
. Put the
Remedy
Refer to the AutoSense filter notification in
"Daily use" chapter.
Check the wireless signal.
Make sure that the wireless connection is
on. Refer to "WiFi connectivity setup" chap‐
ter.
Check if your mobile device is connected to
the wireless network.
Check your home network and router.
Restart the router.
Contact your wireless service provider if
there are further problems with the wireless
network.
The appliance, the mobile device, or both
need to be configured again because a new
router has been installed or the router con‐
figuration has been changed. Refer to "WiFi
connectivity setup" chapter.
Make sure that the wireless signal reaches
the appliance. Try to move the home router
as near the appliance as possible or consid‐
er purchasing a wireless range extender.
Make sure the wireless signal is not disrup‐
ted by a microwave. Turn the microwave
off. Avoid using the microwave and the re‐
mote control of the appliance at the same
time.
appliances marked with the symbol
the household waste. Return the product to
your local recycling facility or contact your
municipal office.
with