Chef-o-Matic KITCHEN ROBOT Manual De Instrucciones página 12

9. ERROR CODES:
Code Status
"E1" flashes on the LCD display and the alarm
E1
sounds.
"E2" flashes on the LCD display and the alarm
E2
sounds.
"E3" flashes on the LCD display and the alarm
E3
sounds.
E4" flashes on the LCD display and the alarm
E4
sounds.
"E5" flashes on the LCD display and the alarm
E5
sounds
10. TECHNICAL SPECIFICATIONS:
220-240V, 500W
top cover/main unit/inner casing:
PP
control panel: 88mm*20mm
stainless steel trough
Lid: PP/PPE
Voltage / Frequency: 220-240V, 50/60Hz.
Power: 1000W hot;
With movement: 500 W
Speeds: 1 2 3 4 5 6 7 8 9 10
RPM (±20%): 130, 300, 500, 800, 1000, 1500,
2000, 2500, 3000, 3500
11. QUALITY ASSURANCE
This product is covered by a warranty against manu-
facturing defects subject to the time periods stipula-
ted by the legislation in force in each country.
This warranty does not cover damage resulting from
inadequate use, negligent commercial use, abnor-
mal wear and tear, accidents or improper handling.
Australia & New Zealand only
This product has the benefit of certain Con-
sumer Guarantees. These are prescribed
by the Australian Consumer Law & the New
Zealand Consumer Guarantees Act 1993
both of which provide protection for consu-
12
Solution
It must be sent to the authorised service
centre for repair.
Remove the jar and reinstall it according
to the operating instructions.
It should be sent to the authorised service
centre for repair if the above operation
does not work.
Remove the jar lid and reinstall it accor-
ding to the instructions for use.
It should be sent to the authorised service
centre for repair if the above operation
does not work.
The temperature of the appliance is too high.
First let it cool down for 2 hours and then
restart it.
It should be sent to the authorised service
centre for repair if the above operation
does not work.
First let it cool for 2 hours and then restart
it.
mers. There is no express warranty for this
product in Australia or New Zealand. The
above paragraph refers to other countries.
ATTENTION
HOW TO DISPOSE OF MATERIALS
A symbol of a crossed-out wheeled bin
means you should find out about and fo-
llow local regulations about disposing of this kind
of product.
Do not dispose of this product as you would
other household waste. Dispose of this device
in accordance with the corresponding local re-
gulations.
Electrical and electronic devices contain hazar-
dous substances that can have harmful effects
on the environment and/or human health and
should be recycled properly.
Made in China