Salicru SPS.ADVANCE RT2 Manual De Usuario página 55

7. CONTROL PANEL WITH LCD
DISPLAY.
7.1. GENERAL INFORMATION FOR THE
SERIES.
7.1.1. Information represented by the display.
Battery charge level
information (each
segment is equivalent to
10%, although they are
activated in pairs)
Input voltage information
Fig. 15. Graphic and textual information shown on the display.
7.1.2. Other messages shown on the LCD
display.
Display
Information about programmable outputs
P1
Indicates that the programmable outputs are activated.
Information about the operating mode of the device.
Indicates that the device is supplying output voltage from
BATTERY
the battery (battery mode).
Indicates that the device is supplying output voltage from
ECO
the input (normal mode).
CHARGING
Indicates that the device is in charging mode.
BUCK
Indicates that the device is in buck mode.
BOOST
Indicates that the device is in boost mode.
Information about battery charge level.
Indicates that the battery is not connected.
BATT FAULT
Tab. 6. Description of other messages shown on the control pan-
el's LCD display.
USER MANUAL
Failure or warning Estimated backup
information information
+
Information about the operating mode of the device
Meaning
Audible alarm
disabled
+
7.1.3. Common abbreviations shown on the
display.
Code On display
E A
U
ENA Enabled.
d1S
DIS Disabled.
ON
ON Start-up.
EP
EPO Emergency power off.
ESC
ESC Escape.
AO
AO EPO normally open.
AC
AC EPO normally closed.
OK
Ok Ok.
Sd
SD Shutdown.
SPS.ADVANCE RT2 UNINTERRUPTIBLE POWER SUPPLY (UPS)
Battery charge
connected to the output
level information (each
segment is equivalent to
10%, although they are
activated in pairs)
Output voltage
information
Meaning
55