ROBBE Power Peak C8 EQ-BID Manual De Uso página 35

Power Peak ® C8 EQ-BID 180W
Cell 1
7.1 ADDITIONAL PARAMETERS IN THE MAIN MENU WITH BID
When a BID chip or key is connected, the following battery data can be read out:
DISPLAY OF MAXIMUM CHARGED-IN CAPACITY
DISPLAY OF MAXIMUM DISCHARGED CAPACITY
DISPLAY OF CHARGE CYCLES
DISPLAY OF A USER-DEFINABLE DATE
DISPLAY OF MAXIMUM BATTERY VOLTAGE
8. EDITING DATA WITHOUT BID
Use the "EDIT" button to select the "EDIT DATA" menu, then press the "ENTER" button
to select the menu. Use the "+" or "-" buttons or the Select Wheel to display the following
parameters:
Operating Instructions
Display of the maximum charged-in battery capacity
to date. If the previous value is exceeded during a
charge process, the old value is automatically super-
seded.
Display of the maximum discharged battery capacity
to date. If the previous value is exceeded during a
discharge process, the old value is automatically
superseded.
Display of the battery's previous charge cycles. At the
end of a charge process the counter is incremented
by 1.
Display of the user-defined date on the BID chip or
key (e.g. date of purchase of the battery).
Maximum battery voltage during a charge or discharge
process.
11
Cell 6
Cell 8
No.
8124