Descargar Imprimir esta página

ROBBE Power Peak C8 EQ-BID Manual De Uso página 45

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 98
Power Peak ® C8 EQ-BID 180W
Temperature differences always occur during the discharge process, as the outer cells are
invariably cooled more effectively than the inner ones. The effect of this, combined with
normal manufacturing tolerances, is that the state of charge of series-connected Lithium-
Polymer cells always tends to drift. After several discharge / charge cycles individual cells
inevitably exhibit differences in voltage.
17.
GUARANTEE
Naturally we guarantee this battery charger for the statutory period of 24 months. If you
believe you have a valid claim under guarantee, please contact your dealer in the first
instance, as he is responsible for processing guarantee claims.
During the guarantee period we will correct any operating deficiencies, production defects
and material faults which arise, at no charge to you. We will not entertain any claims bey-
ond these terms, e.g. consequent damage.
The unit must be returned to us carriage-paid; it will also be returned to you carriage-paid.
We will not accept goods sent to us without pre-paid carriage.
We accept no liability for transit damage and the loss of your shipment; we therefore
recommend that you take out suitable insurance to cover these risks.
Send the unit to the Service Centre responsible for the country in which you live.
The following conditions must be fulfilled if we are to process your guarantee claim:
Send proof of purchase (till receipt) with your shipment.
• The unit must have been operated in accordance with the operating instructions.
• The unit must have been operated with the recommended power sources and genuine
robbe accessories.
• The unit must not exhibit damage due to damp, unauthorised intervention, reverse pola-
rity, overload conditions or mechanical damage.
• Please include a concise description of the fault or defect, as this will help us identify the
problem.
18.
LIABILITY EXCLUSION
This charger is designed and approved exclusively for charging the types of battery stated
in these operating instructions. robbe Modellsport accepts no liability of any kind if the
charger is used for any purpose other than that stated. We at robbe Modellsport are una-
ble to ensure that you observe the instructions supplied with the charger, and we have no
control over the methods you employ for using, operating and maintaining the device and
the batteries. For this reason we are obliged to deny all liability for loss, damage or costs
which are incurred due to the incompetent or incorrect use and operation of our products,
or which are connected with such operation in any way. Unless otherwise prescribed by
law, our obligation to pay compensation, regardless of the legal argument employed, is
limited to the invoice value of those robbe products which were immediately and directly
involved in the event in which the damage occurred. This does not apply if the company is
found to be subject to unlimited liability according to binding legal regulation on account of
deliberate or gross negligence.
Operating Instructions
21
No.
8124

Publicidad

loading

Este manual también es adecuado para:

8124