OMFB RADAR II Manual De Instalacion Y Uso página 38

"RADAR II"
4.4 Output connectors
The 3 versions of receivers have the following low-voltage outputs (unstable relay type,
"deadman" activation):
Radar II 2 CH Receiver
• 2 outputs to activate electrical devices
(such as solenoid valves or relays), with a
maximum absorption of 8 A each. The two
outputs are enabled by the UP and DOWN
functions of channel 1, respectively, and
are not clean contacts, but reflect the sup-
ply voltage of the device (9 ÷ 28V);
•
1 AUX output (see 4.3 for more informa-
tion) with a maximum absorption of 8 A.
Radar II 2 CH RIM Receiver
• 2 outputs to activate electrical devices
(such as solenoid valves or relays), with
a maximum absorption of 8 A each. The
two outputs are enabled by the UP and
DOWN functions of channel 2, respec-
tively, and are not clean contacts, but
reflect the supply voltage of the device
(9 ÷ 28V);
•
1 AUX output (see 4.3 for more informa-
tion) with a maximum absorption of 8 A.
Radar II 4 CH Receiver
• 4 outputs to activate electrical devices
(such as solenoid valves or relays), with
a maximum absorption of 8 A each. The
4 outputs are enabled by the functions
UP and DOWN of channel 1 and chan-
nel 2, respectively, and are not clean
contacts, but reflect the supply voltage
of the device (9 ÷ 28V);
• 1 AUX output (see 4.3 for more infor-
mation) with a maximum absorption of
8 A.
WARNING: In the versions with 6 CH, 8
CH, 10 CH, 12 CH, the 2 or 3 receivers
have the same technical specifications
as the 4CH.
USER MANUAL
Down (4)
-
Up (3)
Down 1 (4)
-
Up (3)
Down 2 (4)
-
Up 2 (3)
pag.38
O.M.F.B. S.p.A. Hydraulic Components
We reserve the right to make any changes without notice.
Edition 2003.06 No reproduction, however partial, is permitted.
Via Cave, 7/9 25050 Provaglio d'Iseo (Brescia) Italy Tel.: +39.030.9830611
Fax: +39.030.9839207-208 Internet:www.omfb.it e-mail:contatti@omfb.it
+ (1)
Auxiliary apparatus (2)
+ (1)
Auxiliary apparatus (2)
+ (1)
Auxiliary apparatus (2)
101050
Plug 1
Plug 2