golmar Stadio Plus Manual De Instalación página 83

82
M
emory banks.
The doorpanel has two memory banks
to plug 256Kb memory modules in.
Each module allows to record the custom
text for a maximum of 968 users.
The system is delivered with one memory module
placed in the bank number 0 (BK0), where
the system configuration will be recorded.
IMPORTANT: in case of doorpanels with two memory modules,
don't change their bank position once they have been recorded.
BK0 bank module must always have a memory module plugged in.
C
omputer connection.
It's possible to program the doorpanel using a
computer through its RS-232C port.
An interface (not included) should be connected
to CN7 doorpanel connector. MEMEDIT software
(included with the interface) will allow to program
the doorpanel and to save a copy of each system.
In case of memory damage it will be possible
to restore the system configuration from the computer.
D
etachable connector.
The doorpanel has detachable connectors, that makes the
connection of the doorpanel to the installation much
more easier.
Detach the connector by pulling with a slot
screwdriver.
Make the proper connections according to the
installation diagrams on pages 115 to 125. Pay
special attention to follow the specified order for each
connection on the doorpanel silk.
Place again the connectors in the original position.
DOORPANEL INSTALLATION
BK1 BK1
BK0 BK0