golmar Stadio Plus Manual De Instalación página 94

DOORPANEL PROGRAMMING
To introduce or edit text during programming, use the keypad as described. The maximum
number of characters in one text line is 16.
Use the numeric keys to introduce text: press several times the corresponding key till the
desired character appears on the display, according with the enclosed characters table.
For fast searching press one of the arrow keys followed by the number of entries to be
skipped. For a faster search use arrow keys followed by number 0 (10 in 10 entries)
or key symbol (100 in 100 entries).
Use the arrow keys to move through the display.
Use the key symbol to delete the actual character. The rest of the text
will be moved one position backward.
Press OK to record the whole text. The display
will show the message
Press CANCEL key to exit from edition. The former text will be restored
and the display will show the message
The search is realized of 5 in 5 entries. From that moment, each time
an arrow key is pressed the repertory advances 5 in 5 entries.
settings recorded
cancelled
F
93
T
ext edit.
.
.
ast repertory search.