golmar Stadio Plus Manual De Instalación página 91

90
Coming from previous page
repertory
repertory:new
enter address
enter direct cod
enter name
_
setting recorded
NOTE: to make a call it will not be necessary to enter the zero placed on the left side
DOORPANEL PROGRAMMING
:000
:000000
of the call code. For instance, if the call code is 000100, it will be enough to
enter 100 to make the call.
To enter into repertory menu, follow
the steps described on page 83
and press OK when the display shows the
message
repertory
Allows to enter a new entry in the last repertory
position. To choose a specific position,
use the
repertory:insert
Press OK to proceed: the display will show
the message
enter address
monitor code and confirm by pressing OK.
If the panel has been configurated as general
entrance door panel, a six digits code must
be entered: the three first digits will match the
internal building code and the three last
digits will match the monitor code.
If the panel has not been configurated as
general entrance door panel, a three digits
code will be required, that will match the
monitor code.
IMPORTANT: if "Direct Call Code" function
has been enabled (page 85), the display
will show the message
enter the six digits code that will be used
to call to this apartment.
Press OK to validate it.
To assign a text to this entry press OK and
proceed as described on page 93.
Once the new entry has been recorded
the display will show the message
settings recorded
to the initial screen. Repeat this procedure
to add as much entries as it is needed.
R
epertory menu.
.
menu.
; key in the
;
enter direct cod
, and will return
Continue