golmar Stadio Plus Manual De Instalación página 86

DOORPANEL PROGRAMMING
Coming from previous page
*
call to exchange
*
autoswitch-on
*
direct call code
set time
modify value
set time
display clock
If the option YES is selected, the calls made
on the door panel will be transferred to the
yes
porter's exchange (if exists) in a first attempt.
To enable this function, the porter's exchange
must enable its capture panel function.
Press OK to change this value.
Allows to establish video and/or audio
communication without a previous call.
yes
In buildings with several panels, this function
can be activated in one of them only;
in systems with general entrance panel,
this function can be activated in the
internal building door panels only.
Press OK to change this value.
Allows the activation of a second call code for
each apartment, that can be different to the
yes
programmed call code. This code must be
assigned on the repertory menu (page 90).
Press OK to disable or enable this feature.
The system has an internal clock that allows
to show the time on the door panel display
16:24
when the system is on stand-by position.
This feature can be disabled on the following
step and on the user menu.
An internal battery keep the system on time
even if the power supply is disconnected
during a long period of time.
16:24
To set the time press OK: the display will show
the message
the hour value from 0 to 23 and minutes
value from 0 to 59 and confirm by pressing
OK. If CANCEL is pressed the former value
will be restored.
17:30
Allows to show or to hide the display clock
when the system is on stand-by position.
yes
Press OK to change this value.
C
onfiguration menu.
. Key in
modify value
Continue
85