Publicidad
Idiomas disponibles
Idiomas disponibles
•
Disconnect the appliance from the mains electricity supply before carrying out any work or main-
tenance on it.
Connecting the hob to the mains power supply (F10)
Before connecting the hob to the mains power supply, check that:
1.
2.
3.
plate.
4.
regulations and law. The earth connection is a legal requirement.
-
T o connect the hob to the mains power supply, do not use adapters, reducers, or
branching devices, as they can cause overheating and fire.
Where the appliance is not supplied with a cable or plug, use suitable material for the current
-
indicated on the rating plate and for the operating temperature. The cable must never reach a
temperature of more than 50 °C above the ambient temperature.
-
The power supply should be connected in compliance with the relevant standard, or a
single-pole circuit breaker .
-
The installer must ensure that the correct electrical connection has been made and that it is
compliant with safety regulations.
-
The cable must not be bent or compressed.
60819630.20.07.2020.indd 34
60819630.20.07.2020.indd 34
The domestic wiring system is suitable for the power drawn by the hob.
The voltage corresponds to the value given in the rating plate.
The power supply cable sections can withstand the load specified on the rating
The installation is fitted with an efficient earthing connection in line with current
1/10/20 10:22
1/10/20 10:22
Publicidad
