Publicidad
Idiomas disponibles
Idiomas disponibles
10 www.aeg.com
Some programmes accept only
one of the two functions.
EXTRA RINSE BUTTON
Press button
a programme.
Use this function for persons allergic to
detergents and in areas where the water
is soft.
STAIN BUTTON
Press button
a programme.
Use this function for laundry with hard
stains to remove.
When you set this function, put the stain
remover into compartment
This function increases the pro-
gramme duration.
This function is not available with
a temperature lower than 40° C.
SPIN BUTTON
Press this button to:
• Decrease the maximum speed of the
spin phase when you set a programme.
The display shows only the spin
speeds available with the set pro-
gramme.
• Deactivate the spin phase.
• Activate the 'Rinse Hold' function. Set
this function to prevent fabric creases.
The appliance does not drain the water
when the programme is completed.
TEMPERATURE BUTTON
Press button
temperature.
- -
ACOUSTIC SIGNALS
FUNCTION
You can hear the acoustic signals when:
7
to add rinsing phases to
8
8
to add the stain phase to
9
Spin phase is off.
'Rinse Hold' function is
on.
10
to change the default
= cold water
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
7
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic sig-
nals, press button
the same time for 6 seconds.
CHILD LOCK FUNCTION
This function prevents children to play
with the control panel.
.
• To activate the function, press button
10
til the display shows the symbol
• To deactivate the function, press but-
ton
until the symbol
You can activate the function:
• Before you press the Start/Pause but-
ton
• After you press the Start/Pause button
4
knob are deactivated.
PERMANENT EXTRA RINSE
FUNCTION
With this function you can keep the extra
rinse function permanently on when you
set a new programme.
• To activate the function press button
6
til the indicator of button
• To deactivate the function press button
6
til the indicator of button
10
8
and button
If you deactivate the acoustic sig-
nals, they continue operate only
when you press the buttons and
when a malfunction occurs.
and button
9
at the same time un-
and button
at the same time
10
9
goes off.
4
: the appliance cannot start.
, all the buttons and the programme
and button
5
at the same time un-
and button
at the same time un-
5
7
at
.
is on.
7
7
is off.
Publicidad
