5.
Measure out the detergent and the
fabric conditioner.
6.
Carefully close the detergent dis-
penser. Make sure that the flap does
not cause a blockage when you close
the drawer.
SETTING AND STARTING A PROGRAMME
1.
Turn the programme knob. The rela-
ted programme indicator comes on.
2.
The indicator of button
with red colour.
3.
The display shows the default tem-
perature and spin speed. To change
the temperature and/or the spin
speed, press the related buttons.
4.
Set the available functions. The indi-
cator of the set function comes on or
the display shows the related symbol.
5.
Press button
gramme. The indicator of button
is on.
The appliance adjust automat-
ically the cycle time to the
laundry you have put in the
drum to have perfect washing
results in the minimum neces-
sary time. After approximately
15 minutes from the start of
the programme, the display
shows the new time value.
INTERRUPT A PROGRAMME
1.
Press button
es.
2.
Press button
programme continues.
flashes
4
4
to start the pro-
. The indicator flash-
4
4
again. The washing
4.
To use liquid detergent, turn the flap
down.
With the flap in the position
DOWN:
– Do not use gelatinous or thick
liquid detergents.
– Do not put more liquid deter-
gent than the limit showed in
the flap.
– Do not set the prewash phase.
– Do not set the delay start func-
tion.
CANCEL A PROGRAMME
1.
Press button
gramme and to deactivate the appli-
ance.
2.
Press button
appliance. Now, you can set a new
washing programme.
The appliance does not drain the
water.
CHANGE A FUNCTION
4
You can change only some functions be-
fore they operate.
1.
Press button
es.
2.
Change the function set.
SET THE DELAY START
1.
Press button
the display shows the number of mi-
nutes or hours. The related symbols
comes on.
2.
Press button
the countdown of the delay start.
When the countdown is completed,
the programme starts automatically.
ENGLISH
1
to cancel the pro-
again to activate the
1
4
. The indicator flash-
again and again until
5
4
, the appliance starts
17