Audi 8V3.071.126 Instrucciones De Montaje página 31

– Swivel out the claw fasteners -12- and hook the narrow end
of the claw fasteners in the installation position on the base
supports -9-.
– Open the vehicle doors.
– Carefully position the two roof bars on the vehicle roof in the
area marked by the front mounting holes -X- and the rear
position markers -Y-. The claw fasteners must be in the in-
stallation position when positioning the roof bars. Observe
the labels -23- on the underside of the profile tubes when
positioning the roof bars.
Note
The labels must be on the left-hand side of the vehicle and the
printed arrow must point in the direction of travel.
Installation instructions - Audi A3 (8V3) 2012 ▶
4 Installing/removing roof bars on vehicle
Edition 06.2012
9