Publicidad
Idiomas disponibles
Idiomas disponibles
FAULT
Plastic tableware is not
properly dry
Cutlery is not dry
Interior sides of the
appliance are wet after
the wash cycle
Dishes are not properly
clean
Dishwasher detergent
residues in the
appliance
Seite | 50
8
POSSIBLE CAUSE
not activated.
Water collects in recesses in
the crockery or cutlery
Drying process was not yet
finished
Normal phenomenon. Poorer
drying performance for
plastic.
Cutlery incorrectly sorted
Normal phenomenon
• Dishes not properly
arranged
• Rotation of the spray arms
is blocked
Clogged spray arm nozzles
Dirty filters
Incorrectly inserted filters
Wrong washing programme
The left and right upper
crockery baskets are not
adjusted to the same height
Tabs have not dissolved in
the short programme
REMEDY
function, if available
Put away dishes at an angle if
possible
(see chapter 4.5 "Loading
dishes and cutlery"
Wait until the programme
ends. Open the door a little
after the end of the
programme. Steam can
escape and the dishes dry out.
No remedy possible
Put away cutlery correctly
(see section 4.5 "Loading
dishes and cutlery")
No action necessary
Load the dishes and cutlery
basket without the spray arms
hitting them (see section 4.5
"Loading dishes and cutlery").
Clean spray arms (see chapter
6 "Cleaning and
maintenance")
Clean filter (see chapter 6
"Cleaning and maintenance")
Insert filters correctly
Select a more powerful
washing programme
Adjust the left and right
crockery basket to the same
height.
Set a more powerful
programme or use powder
detergent
Faults
Publicidad
