Dalbach GS60V-0B Manual página 52

FAULT
Rust marks on cutlery
Dishwasher detergent
residues in the
detergent container
Increased foaming
Noises
Error messages
CODES/PROGRAMME
DISPLAY
(E1)
(E3)
(E4)
Seite | 52
8
POSSIBLE CAUSE
• Cutlery is not sufficiently
rust-resistant
• Rusting parts were washed
The detergent was not
completely rinsed out due to
blocked spray arms
Detergent container was
moist when filling the
detergent
Spilled rinsing agent
Used dishwasher detergent
or machine care products
form too much foam.
Noises during the washing
programme are normal.
MEANING
Prolonged water supply
time
Washing programme
temperature is not
reached
Flooding
REMEDY
Use rust-resistant cutlery and
do not wash rusty parts.
Ensure that spray arms can
rotate freely.
Only fill the detergent into the
dry detergent container.
Remove rinsing agent with a
cloth.
Change dishwasher detergent
These noises are caused by
the gentle removal of food
residues and the opening of
the detergent container.
POSSIBLE CAUSE AND
REMEDY
Tap is not properly turned on or
water pressure is too low.
Water connection tap is scaled.
Commission an plumber for
checking.
Customer service work will be
charged in this case.
Heating element is defective.
Contact After Sales Service.
Some parts of the appliance may
have leaks.
Contact After Sales Service.
Faults