Operating Consoles; Arm Rest Control Panel; Device Carrier Control Assignments - Kärcher MC 250 Manual De Uso

Brake pressure too low warning
Engine oil pressure too low warning
Switch off the engine
Engine error warning
Water from the engine in the fuel
Engine error (regeneration)
Service brake faulty warning
Parking brake faulty warning
Brake fluid warning
Engine temperature too high warning
52
8

Operating consoles

8.1

Arm rest control panel

The control panel is located on the arm rest next to the
driver's seat. The arm rest can be individually adjusted to
suit the driver, see chapter "Setting the driver's seat".

8.1.1 Device carrier control assignments

Note
The indicators in the switches light when the switches are
switched on.
Left joystick
1
Right joystick
2
Not used
3
Switching the hydraulic system on/off
4
Not used
5
Not used
6
Electrical AUX 1 rear / AUX 3 front
7
Switching the rear PTO on/off
8
Not used
9
Electrical AUX 2 rear / AUX 4 front
10
(A) Front PTO, 40 l/min maximum
The hydraulic power can be adjusted via a potentiom-
eter
(B) Front PTO, 40 l/min maximum
The hydraulic power can be adjusted via a potentiom-
eter
(C) Button for setting the engine speed
Note
The speed can be adjusted in steps of 100 rpm.
(D) Not used
(E) Rear PTO, 60 l/min maximum
(F) Press the button to save set values or programs and
open submenus.
(G) Rotary knob for changing values and selecting pro-
grams.
English