Descargar Imprimir esta página

Topcom TITAN 100 Manual De Usuario página 4

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
Topcom Titan 100
Do not operate the equipment if the telephone cable or the equipment itself is
damaged.
If the equipment is dropped, it must be checked by a professional before
further use.
Dangerous voltages are present inside the equipment. Never open the housing
or insert objects through the ventilation holes.
Do not allow liquids to get into the equipment. In case of emergency, pull out
the plug from the socket.
Similarly, if a fault develops during use or before you start to clean the
equipment, pull the plug out of the socket.
Do not touch plug contacts with sharp or metal objects.
Do not carry out any modifications or repairs to the equipment yourself. Have
repairs done to the equipment or the mains cable only by a specialist service
centre. Unsatisfactory repairs can lead to considerable danger for the user.
Children frequently underestimate the dangers associated with electrical
equipment. Therefore you must never leave children unsupervised in the
vicinity of electrical equipment.
The equipment is not to be used in a damp room (e.g. bathrooms) or rooms
where there is a lot of dust.
Equipment connected to the telephone line during a thunderstorm can be
damaged by lightning. Therefore you should pull the plug out of the main socket
during a storm.
5
Buttons/LED
1.
Handset
2.
Line cord connector
3.
Ringer switch (on/off)
4.
Handset volume switch
5.
Keypad
6.
Program button
7.
Memory button
8.
In use LED
9.
Redial/Pause button
10. Flash button R
11. Mute button
12. Music on hold button
13. Handset curl cord connector
6
Installing the line cord
For installation, do the following:
Put the telephone on a flat surface.
Plug one end of the line cord into the telephone wall outlet and the other end
into the Line connector on the backside of the telephone (2).
4
1
13
12
11
3
2
4
5
6
7
10
9
8
Topcom Titan 100

Publicidad

loading