Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
Before first use
IMPORTANT!
•
This speaker contains a non-replaceable battery.
•
Before plugging in and switching on the speaker, make sure that all the controls
are turned off or set to the minimum level.
•
If the speaker is not working properly, this may be because the battery is too
low and needs to be recharged.
Charging the speaker
1.
Connect the charging cable's USB connector to a USB port on a computer, laptop, USB
charging plug adaptor or a USB wall socket.
2.
Insert the other end of the charging cable into the 5 V DC IN (5 V AC) socket on the top
of the speaker.
•
The indicator light turns red when the speaker is charging and green when the battery
is fully charged.
•
The battery takes approximately 6 hours to fully charge and provides roughly 6 hours of
playback time at two-thirds of the maximum volume (level 20) or about 4 hours at full
volume (level 30).
•
A sound prompt will alert you when the battery is low.
Connections
Connect your device to the speaker using the cables and sockets/slots detailed below:
Device
Connection
Microphone
Use a microphone cable with a 6.35 mm
plug (not provided).
Phone, iPad or
Use a LINE IN cable with a 3.5 mm plug
tablet
(not provided). The other end of the
CD/DVD player
cable must be connected to your audio
MP3 player
device.
Record player
TV
USB memory
Plug in your USB memory stick to play
stick
MP3, WMA or WAV files.
TF card or Micro
Insert your card into the speaker's TF
SD card
slot to play MP3, WMA or WAV files.
22
EN
Speaker socket/slot
MIC IN
LINE IN
USB
TF
Publicidad
