Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
Operation
WARNING! Before plugging in and switching on the speaker, make sure that all
the controls are turned off or set to the minimum level.
NOTE:
•
The speaker can be used while it is charging but if the battery is too low, the
speaker performance might be poor. Lowering the volume may help improve
the sound.
•
To ensure excellent sound quality, we recommend disconnecting the charging
cable from the speaker as soon as it has finished charging.
Music playback
1.
To turn on the speaker, slide the ON/OFF POWER SW to the ON position. When the speaker
is turned on, you will hear a sound, the blue LED lights on the top of the speaker will light
up and the word HI will be displayed on the screen.
NOTE: If the unit is not used for 10 minutes, it will go into standby mode and the
blue LED lights will turn off. Switch the speaker's ON/OFF POWER SW to the ON
position to turn the speaker on again.
2.
Connect your audio source as described in the Connections section.
3.
The screen on the top of the speaker will indicate the speaker's active mode (BT, USB,
TF, FM or LINE IN).
4.
To select the playback source, press the MODE button several times until the desired
mode appears: BT, USB, TF, FM and LINE IN. When you insert a USB stick or TF/Micro
SD card, USB or SD will automatically be displayed on the screen.
NOTE:
•
Make sure the volumes on both the speaker and the connected external
device are turned on.
•
Whilst the TF card or USB memory stick is playing, the track playback time
will be displayed.
•
If you stop playback and/or unplug an audio device and then restart playback or
plug the device in again, playback will resume from where it was last stopped.
5.
To control the audio playback, you can either use your external device's controls (if available)
or the following buttons on the speaker itself:
24
EN
Publicidad
