Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
Disco light
•
Slide the LED SW switch upwards to the ON position to turn on the disco lights.
•
Slide the LED SW switch downwards to the OFF position to turn off the disco lights.
Sound prompts
•
Press and hold the MODE button to turn off the sound prompts. OFF will be displayed
on the screen. Repeat this step to re-enable the sound prompts. ON will be displayed
on the screen.
Using the microphone
1.
Connect the microphone (not provided) to the speaker via a microphone cable.
2.
Turn the speaker on.
3.
Turn the - MIC VOL + knob clockwise to increase the microphone's volume and anticlockwise
to decrease the volume.
4.
Turn the – VOLUME + knob clockwise to increase the music's volume and anticlockwise
to decrease the volume.
5.
If you can hear an echo, slide the ECHO button downwards until the echo is reduced or
stops completely.
6.
The microphone priority function lowers the background music when someone is singing
or speaking into the microphone. The background music will increase when no-one is
singing or speaking into the microphone. Press the MIC PRI button until P On is displayed
on the screen to make the microphone the priority sound. Press the MIC PRI button again
to disable this function. P OFF will then be displayed.
7.
When you have finished using the microphone, unplug the cable from the speaker.
NOTE: You can use the microphone in all modes.
26
EN
Publicidad
