FLORABEST FTP 400 A1 Traduccion Del Manual De Instrucciones Originale página 42

GB MT
Symbols in the manual
Warning symbols (the danger
can be explained at the place of
the exclamation mark) with in-
formation on damage and injury
prevention.
Instruction symbols (the instruction
can be explained at the place of
the exclamation mark) with infor-
mation on preventing damage.
Help symbols with information on
improving tool handling.
General notes on safety
Caution! When using power tools,
observe the following basic safety
measures for the prevention of
electric shocks and the risk of in-
jury and fire:
Working with the equipment:
Caution: to avoid accidents and
injuries:
• The device must not be used by people
(including children) with limited physi-
cal, sensory or mental faculties or who
lack the necessary experience and/
or knowledge - other than they are
supervised by a person responsible for
safety or are being instructed to oper-
ate the trimmer by such a person.
• Children must be supervised in order
to ensure that they do not play with the
equipment.
• People who are unfamiliar with the
operating instructions are not permitted
to use the equipment. The operation
of the equipment is not authorised for
42
people under the age of 16.
• Should there be people in the water, do
not operate the equipment.
• Take appropriate measures to keep
children away from the equipment
whilst it is running.
• Dispose of the packaging material cor-
rectly.
• Do not use the equipment in the vicinity
of flammable liquids or gases. Non-
observance will result in a risk of fire or
explosion.
• The transportation of aggressive, abra-
sive (grinding effect), corrosive, com-
bustible (e.g. motor fuels) or explosive
liquids, salt water, cleaning agents and
foodstuffs is not permitted. The tem-
perature of the liquid being transported
must not exceed 35°C.
• Store the equipment in a dry place and
out of reach of children.
Caution! To avoid damage to the
equipment and any possible person
injury resulting from this:
• Do not work with damaged or incom-
plete equipment, or with equipment
that has been converted without the
approval of the manufacturer. Before
initial operation, have a specialist check
that the required electrical protection
measures are in place.
• Monitor the equipment during opera-
tion (particularly in residential spaces,
in order to detect automatic switching
off or dry running of the pumps in time.
Regularly check the function of the float
switch (see chapter "operation"). Non-
observance will invalidate all guarantee
and liability claims.
• Note that the lubricants used in the
equipment may cause damage or con-
tamination if they escape. Do not use