Dreame H13 Pro Manual De Usuario página 9

Care & Maintenance
EN
Cleaning the Solid Waste Filter Basket
Remove the Used Water Tank and then pull up the tank cover. Separate the solid waste
filter basket from the tank cover and clean it.
Note: If you do not need to use the solid waste filter basket, you can remove it.
Cleaning the Brush Assembly
1. First, press the brush roller cover
release buttons inwards on both sides
to remove the brush roller cover. Press
the brush roller release button, and the
brush roller handle will pop out. Pull it to
take out the brush roller.
1
2
13 13
2. Clear any hair and debris caught
on the brush roller with the provided
cleaning brush. Rinse the brush roller
with clean water and dry it completely.
1
2
Care & Maintenance
3. Wipe the suction inlet with a dry cloth
or wet tissue. Do not rinse the brush
assembly with water.
Note:
• Clean as needed. Alternating use of the two provided brush rollers is recommended.
• Replacing the brush roller every 3 to 6 months is recommended.
Cleaning the Tube and the Dirt Sensor
Remove the Used Water Tank, gently wipe the tube and the dirt sensor with a wet cloth
before use.
Dirt Sensor
Note: Do not rinse the tube or the dirt sensor.
4. Re-install the brush roller and the
brush roller cover until you hear a click.
EN
14 14