Publicidad
Idiomas disponibles
Idiomas disponibles
The numerals such as @ in the illustrations indicate the page number on
which this part is discussed.
Front and side
Lens mount
[2] Mounting screw
(CS mount) @
holes
BACK FOCUS adjusting screw
The camera is shipped with the back focus adjusted to suit almost all lenses. [f
necessary, turn this screw with a screwdriver to adjust the focal plane. There is a
self-locking mechanism, so that the focus will not drift after it is adjusted.
[2] Mounting screw holes
Use these holes to fix the camera to a mounting bracket or tripod. The mounting
screw must be as follows.
1/4" UNG (20 pitch)
Q
2: 4.5mm +0.2 mm (ISO standard), or
oem
0.197" (ASA standard)
Publicidad
