Publicidad
Idiomas disponibles
Idiomas disponibles
Product description
Overview
1
Inlet 1 (suction side)
• Filter housing
2
Inlet 2 (suction side)
• Connection of a satellite filter or skimmer.
• The flow rate on inlet 2 and with it the flow ratio of inlet 1 and 2 is adjustable. To do so, undo the
locking mechanism and push the connection to one of the following positions:
− Position 0: Inlet 2 is closed, water flow only via inlet 1.
− Position 1/2/3: Inlet 2 is opened by approx. 25/50/75 %; this means water flow via inlet 1 and 2
based on the set flow ratio.
− Position 4: Inlet 1 is closed, water flow only via inlet 2.
3
Outlet (pressure side)
• Connection of the return flow to the pond (e.g. via a water course).
4
Power cable
5
Control system connection (optional)
• The control system can be used to regulate the pump capacity.
• Without the control system, the activated pump will always run at full capacity.
6
Hose sleeve for outlet (recommendation).
7
Stepped hose adapter for inlet 2 and outlet (alternative).
8
Cover cap for closing inlet 2 when it is not in use.
9
Hose clips for fastening hoses on the hose sleeves.
10
Rubber feet
• Only for dry installation.
11
Pipe adapter for inlet 2 (alternative)
• For connecting pipes with a diameter of 2 in (50 mm) or 1½ in (40 mm)
6
AMX0182
Publicidad
