Publicidad
Idiomas disponibles
Idiomas disponibles
Installation and connection
The pump can be installed submerged (in water) or dry (outside the water).
WARNING
Severe injuries or death from operation of the unit in a swimming pond. Faulty electric compo-
nents will apply dangerous electric voltage to the water.
Never operate the unit in a swimming pond.
CAUTION
Rotating components in the area of the intake connection and the pressure connection. Reach-
ing into the connections can lead to injuries.
Please note in particular: If a unit has stopped due to overload, it can start up unexpectedly!
Do not reach into the opening of the inlet connection or outlet connection while the power
plug is connected.
If the connections are freely accessible, e.g. if no hoses are connected, secure the connections
with a finger guard. The finger guard is available as an accessory.
Avoid exposing any unit components to direct sunlight for extended periods of time, as this
can lead to damage. If necessary, use a protective cover.
Connecting the control system
The pump can be operated with and without a control system.
• The control system can be used to regulate the pump capacity.
• Without the control system, the activated pump will always run at full capacity.
Compatible control systems (accessories):
• Eco Control
Intelligent control system for a pump.
• Garden Cloud Controller
Up to 10 OASE Control-compatible devices (pumps, filters, lights) can be controlled via the
"OASE Control" app.
For information on this topic, visit
www.atlantic-oase.com
(→ "OASE Control").
EN
9
Publicidad
